How Walmart Change Oil: A Complete Guide for 2025

How to Change Oil at Walmart: A Step-by-Step Guide

Changing your oil doesn’t require a mechanic—Walmart makes it easy with affordable supplies and clear tools. In 2025, Walmart offers reliable oil change kits, expert tips, and a convenient in-store service for drivers who want to maintain their vehicle themselves. This guide walks you through the process using Walmart’s most trusted products and current best practices.

Why Walmart is the Best Place for Your Oil Change

Walmart has evolved into a go-to destination for automotive maintenance. With extended hours, knowledgeable staff, and competitive pricing, Walmart’s oil change service combines accessibility with expertise. Whether you’re a weekend warrior or a seasoned DIYer, Walmart provides tools and guidance that reflect real-world efficiency. Plus, their oil filters and fluids meet or exceed industry standards, helping you protect your engine long-term.

What You Need to Change Oil at Walmart

To start, gather these essentials, many available directly at Walmart:

• Engine oil: Use 5W-30 synthetic blended oil (e.g., Pennzoil Synthetic 5W-30) recommended for most 2020+ vehicles—available in 5-gallon buckets or 3.6L containers at Walmart’s auto center.
  
• Oil filter: Choose a high-quality filter compatible with your car model—Walmart stocks brands like Mobil 1 and Bosch with price guarantees.
  
• Drain pan: A 5-gallon or larger pan to safely catch old oil.
  
• Wrench and funnel: Standard tools for fluid removal and refill.
  
• Gloves and safety glasses: For protection during the process.
  

Step-by-Step Oil Change at Walmart

Follow these clear steps to complete your oil change at Walmart with confidence:

Step 1: Prepare Your Vehicle
Park on a level surface and turn off the engine. Wait 5–10 minutes after driving to let oil drain completely. Locate the oil drain plug under the engine—usually on the bottom of the oil pan. Place the drain pan beneath it.

Step 2: Drain the Old Oil
Use a wrench to carefully loosen the drain plug. Allow oil to drain fully—this may take 5–7 minutes. Avoid tipping too fast to prevent spills.

Step 3: Remove and Replace the Oil Filter
Locate the oil filter—often near the engine’s front. Use a filter wrench to unscrew it counterclockwise. Before installing the new filter, apply a thin layer of clean oil to the rubber gasket to ensure a tight seal. Screw the new filter on by hand until snug—do not overtighten.

Step 4: Add Fresh Oil
Pour synthetic oil slowly using a funnel into the oil filler cap. Check your vehicle’s owner manual for the exact oil type and capacity. Walmart’s oil is pre-measured and filtered for purity, matching modern engine demands.

Step 5: Check Levels and Clean Up
Start the engine and let it run for 30 seconds—then turn it off. Use the dipstick to verify oil level: it should be between the